What is the difference between RVM1, RVM2 and RVM3 versions of the RV Whisper Monitor Station? Since RV Whisper first started selling Monitor Stations, there have been 3 versions sold to customers: RVM1 – Larger system with quad core processor RVM2 – Smaller physical system with single core processor RVM3 – Smaller physical system […]
https://rvwhisper.com/wp-content/uploads/2021/10/images_grid-bkg1a.jpg10001200ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2022-11-04 15:43:302022-11-04 15:50:36RVM1 vs. RVM2 vs. RVM3 Monitor Stations
If you have any model Power Watchdog surge protector from Hughes Autoformers you can add it as a “sensor” to your RV Whisper Monitor Station. The detailed instructions for adding a Power Watchdog are displayed in the RV Whisper app when you add a Power Watchdog using the “Add Sensor” feature. If […]
As of May 26, RV Whisper software Version 4.727 is available for customers to upgrade to. This is the software that runs on your RV Whisper Monitor Station (RVM1 or RVM2) that is installed in your RV. Software Update Instructions This version includes major performance improvements, especially for customers with lots of historical data and […]
https://rvwhisper.com/wp-content/uploads/2022/05/rvw-dashboardhires2.png7791118ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2022-05-26 06:41:512022-05-26 06:47:21RV Whisper Software Version 4.727 Available
If you are using a Thornwave PowerMon (DCPM) sensor to monitor your batteries in RV Whisper, you may need to update your RV Whisper software if you are using the new “PowerMon X” version of the phone app from Thornwave Labs. Technical Background: Earlier this year, Thornwave Labs, the manufacturer of the PowerMon battery monitor […]
https://rvwhisper.com/wp-content/uploads/2019/06/DCPM1-Main..jpg13361702ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2022-05-26 06:22:212022-05-26 06:32:22Thornwave DCPM PowerMon X Firmware Support
RV Whisper customers can now use the RV Whisper Gateway to check if there is new software available for their RV Whisper Monitor Station. Customers can also start the update process from the RV Whisper Gateway and track the update process. To use this new software update feature, there are currently two ways to reach […]
If your RV Whisper Monitor Station (RVM1 or RVM2) is not connecting to your WiFi network, or if your RVMx-xxxx Local WiFi network can not be seen, or the RVMx-xxxx WiFi network appears and disappears every few minutes, here are troubleshooting steps to fix the problem. It is best to do them in this order: […]
https://rvwhisper.com/wp-content/uploads/2022/04/shutterstock_496080673-1.jpg6671000ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2022-04-25 14:33:052022-04-29 08:18:59Troubleshooting the WiFi Connection for your RV Whisper Monitor Station
RV Whisper’s monitoring station must establish a Bluetooth connection with the sensors that are placed in different areas of the RV in order to work properly. In most RVs, the Bluetooth works just fine and there are no problems with the connection. But a small percentage of users may have trouble with their Bluetooth signal. […]
https://rvwhisper.com/wp-content/uploads/2022/04/bluetooth-signal-in-rv-min.jpg20423060ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2022-04-01 09:40:442022-04-01 09:41:16Bluetooth Radio Signal Optimization in RVs
Many RV campsites in state parks and national parks don’t have electrical hookups, so knowing if your batteries will get you through a 2 or 3-day weekend camping trip is pretty important to help keep it a fun and safe trip for you and your family. For many people, off-grid RV camping for a week […]
https://rvwhisper.com/wp-content/uploads/2022/03/shutterstock_1410157244-1.jpg7501000ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2022-03-31 10:49:212022-03-31 10:49:40Properly Monitoring Your RV Batteries for Off-Grid Camping
The RV Whisper Monitor Station (RVM1 or RVM2) collects data from sensors in the RV using Bluetooth radio signals. The RV Whisper Monitor Station must be able to see the Bluetooth radio signal of the sensors that are placed in different areas of the RV in order to work properly. In most RVs, the Bluetooth […]
https://rvwhisper.com/wp-content/uploads/2022/01/shutterstock_702006307-1.jpg6671000ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2022-01-26 17:04:092022-01-29 18:58:41Bluetooth Radio Signal Optimization in RVs
Have you done the USB Cable Squeeze Yet? In August and September of 2021, we found that a significant number of customer problems with WiFi and Bluetooth reliability were due to a low voltage condition inside the RV Whisper Monitor Station (RVM1 and RVM2 systems). There is a SIMPLE FIX recommended for all customers: Simply squeeze the larger connector that is on one end of […]
https://rvwhisper.com/wp-content/uploads/2021/11/images_blog_usb-cable.jpg6671000ed.benderhttps://rvwhisper.com/wp-content/uploads/2021/09/logo.pnged.bender2021-11-30 14:38:212022-01-11 14:50:23USB Cable Squeeze to Fix Low Voltage Condition
RVM1 vs. RVM2 vs. RVM3 Monitor Stations
/in Other/by ed.benderWhat is the difference between RVM1, RVM2 and RVM3 versions of the RV Whisper Monitor Station? Since RV Whisper first started selling Monitor Stations, there have been 3 versions sold to customers: RVM1 – Larger system with quad core processor RVM2 – Smaller physical system with single core processor RVM3 – Smaller physical system […]
Power Watchdog and RV Whisper Troubleshooting
/in Other/by ed.benderIf you have any model Power Watchdog surge protector from Hughes Autoformers you can add it as a “sensor” to your RV Whisper Monitor Station. The detailed instructions for adding a Power Watchdog are displayed in the RV Whisper app when you add a Power Watchdog using the “Add Sensor” feature. If […]
RV Whisper Software Version 4.727 Available
/in Other/by ed.benderAs of May 26, RV Whisper software Version 4.727 is available for customers to upgrade to. This is the software that runs on your RV Whisper Monitor Station (RVM1 or RVM2) that is installed in your RV. Software Update Instructions This version includes major performance improvements, especially for customers with lots of historical data and […]
Thornwave DCPM PowerMon X Firmware Support
/in Other/by ed.benderIf you are using a Thornwave PowerMon (DCPM) sensor to monitor your batteries in RV Whisper, you may need to update your RV Whisper software if you are using the new “PowerMon X” version of the phone app from Thornwave Labs. Technical Background: Earlier this year, Thornwave Labs, the manufacturer of the PowerMon battery monitor […]
Software Update “Self Service” for RV Whisper Users
/in Other/by ed.benderRV Whisper customers can now use the RV Whisper Gateway to check if there is new software available for their RV Whisper Monitor Station. Customers can also start the update process from the RV Whisper Gateway and track the update process. To use this new software update feature, there are currently two ways to reach […]
Troubleshooting the WiFi Connection for your RV Whisper Monitor Station
/in WiFi Troubleshooting/by ed.benderIf your RV Whisper Monitor Station (RVM1 or RVM2) is not connecting to your WiFi network, or if your RVMx-xxxx Local WiFi network can not be seen, or the RVMx-xxxx WiFi network appears and disappears every few minutes, here are troubleshooting steps to fix the problem. It is best to do them in this order: […]
Bluetooth Radio Signal Optimization in RVs
/in rv devices/by ed.benderRV Whisper’s monitoring station must establish a Bluetooth connection with the sensors that are placed in different areas of the RV in order to work properly. In most RVs, the Bluetooth works just fine and there are no problems with the connection. But a small percentage of users may have trouble with their Bluetooth signal. […]
Properly Monitoring Your RV Batteries for Off-Grid Camping
/in RV Monitoring/by ed.benderMany RV campsites in state parks and national parks don’t have electrical hookups, so knowing if your batteries will get you through a 2 or 3-day weekend camping trip is pretty important to help keep it a fun and safe trip for you and your family. For many people, off-grid RV camping for a week […]
Bluetooth Radio Signal Optimization in RVs
/in RV Monitoring/by ed.benderThe RV Whisper Monitor Station (RVM1 or RVM2) collects data from sensors in the RV using Bluetooth radio signals. The RV Whisper Monitor Station must be able to see the Bluetooth radio signal of the sensors that are placed in different areas of the RV in order to work properly. In most RVs, the Bluetooth […]
USB Cable Squeeze to Fix Low Voltage Condition
/in Other/by ed.benderHave you done the USB Cable Squeeze Yet? In August and September of 2021, we found that a significant number of customer problems with WiFi and Bluetooth reliability were due to a low voltage condition inside the RV Whisper Monitor Station (RVM1 and RVM2 systems). There is a SIMPLE FIX recommended for all customers: Simply squeeze the larger connector that is on one end of […]